WHY PROX?

DURABILITY

The control environment is a nasty place, that’s why the Joral ProxEncoder is totally encapsulated in epoxy. With an IP69k configuration that survives destructive conditions like submersion in hydraulic oil, deep sea salt water, dust control spray, or corrosive wash.

MULTIPLE OPTIONS AVAILABLE

OUTPUTS

  • Quadrature
  • CAN J1939
  • PWM
  • Analog
  • And more!

HOUSINGS

  • PE18 - 18mm Round
  • PEBX - Face Sense Rectangle
  • PEBX-101 - Side Sense Rectangle

MATERIAL

  • Aluminum
  • Stainless Steel

BUILT FOR YOUR NEEDS

Customization of our sensors allows us to capture your creative needs. If you don’t see what you need listed, shoot us an email! Joral LLC can custom design your hardware or software to maximize your solution.

customize your order

PRODUCT FEATURES

WHAT IS A PROXENCODER® NON-CONTACT SENSOR?

ProxEncoder Sensors are devices used for detecting rotation – in the form factor of a sensor traditionally used for linear measurement. As a Prox Switch made detecting linear motion simple – a ProxEncoder Non-Contact Sensor makes sensing rotation simple.

FORM FACTORS

PE18 – 18mm Round
PEBX – Face Sense Rectangle
PEBX-101 – Side Sense Rectangle

OUTPUT TYPES

Quadrature 64 standard PPR with index single ended push-pull driver
Analog 0-90, 0-180, 0-360 .5-4.5 VDC and 4-20 mA
PWM Output Voltage and Current
SAE J1939 with CAN Driver 8 sensors on a network
CAN with Can Driver 8 Sensors on a network
RS485 Modbus 32 sensors on a network soft address
SSI via 485 driver

CUSTOM ANGLES, OUTPUTS & RESOLUSTIONS
AVAILABLE – CONSULT JORAL LLC

Contact Us

ProxEncoder ® MOUNTING STYLES

CLASSIC

CYLINDER PE18

The classic cylinder mount is quick and easy to install and adjust. Industry standard mounting brackets for 18mm prox switches are available from Joral and a host of prox switch vendors.

SIDE SENSE

PEBX – 101

Square Side Sense allows the ProxEncoder to be installed on a flat surface, with minimum depth off the end of the monitored shaft. 2 #10 cap screws retain the sensor to the mounting surface.

FACE SENSE

PEBX

Square End Sense allows ProxEncoder to be installed on a flat surface – with axial sensor placement to the monitored shaft. 2 #10 cap screws retain the sensor to the mounting surface.